|
1. STANDARD SUB FLOOR SYSTEM:
- Treated Sill Plates
- Trusses
- Advantec™ 3/4" Tongue & Groove Decking
- Sub floor Adhesive
- Two courses of matching 8-in. siding to cover sub floor band
2. STANDARD PORCH & DECK FLOOR PACKAGE:
- Double 2x8 treated deck perimeter band
- 2x8 treated joists
- Premium radius edge treated floor decking
- Pressure treated railings with pressure treated 2x2 pickets
3. STANDARD LOG WALL SYSTEM:
- Kiln Dried Eastern White Pine interlocking double tongue & groove logs
- Protected with Timbor™
- TPI Log Wall 40 logs
- Lag bolts and washers
- Double strips of closed-cell insulation gasket
- Installation adhesive
- Window & door rough opening frames with splines
- Blueprints and log wall erection diagrams
- Wrapped log bundles
4. STANDARD SECOND FLOOR SYSTEM:
- 4x8 Joist (Douglas Fir)
- 6x12 Girder Beam
- Support post with adjustable screw jacks,
- 2x6 Premium Select Tongue & Groove Decking (Premium Spruce)
- Lag Screws for installation
5. STANDARD EXTERIOR WALL AREA:
- 2x6 wall framing (2x4 where required)
- 7/16-in. OSB
- Tyvek House Wrap
- Exterior siding – Your choice of matching log siding, cedar shakes, or board & batten siding
6. STANDARD HEAVY TIMBER STAIRS:
- 4x12 Douglas Fir Stringers and Treads to 9-ft. high (this does not include material for landings)
7. ROOF SYSTEM:
- Exposed #1 or better heavy timber rafters ( Douglas Fir)
- Collar ties with bolts, nuts, and washers for side mount collar tie attachment
- Ridge, valley and header beams
- Support post
- 2x6 premium select tongue & groove decking (Spruce)
- 30 lb. vapor barrier on top of decking
- R 30 rigid insulation
- 7/16 OSB roof sheeting
- 30 lb. felt (ready for finish roofing)
- Lag and Oly screws for rafter installation
- Roof system fascia
8. STANDARD PORCH SYSTEM:
- Exposed 4x8 #1 and Better heavy timber rafters
- 4x8 support plates,
- 6x6 or 8-inch round support posts
- 2x6 Premium Select tongue & groove decking (Spruce)
- 30 lb. felt
- 1x12 Fascia boards
- Olympic screws for rafter installation. (Porch roof not insulated)
9. STANDARD INTERIOR WALL FRAMING:
- 2x4 Interior wall studs - 2x6 framing for plumbing walls
- Double top plates
- Single bottom plates
10. STANDARD EXTERIOR DOORS BY THERMA-TRU™:
- Therma-Tru Fiber Classic™ wood grain door
- Pre-hung in clear stain grade wood jambs
- Double bored for deadbolt with adjustable threshold
- Therma-Tru™ doors are shipped with log package.
- Exterior Door trim
11. STANDARD EXTERIOR WINDOWS BY PELLA™:
- Pella™ Proline Windows (excluding fixed glass)
- Features high performance insulated glass, removable grilles & matching screens
- All window packages are delivered to your job site based on building schedule.
- Exterior window trim
12. FREIGHT:
- Shipping costs are based on distance and location of your building site. Please contact an Arrowhead Structures representative for your estimate.
|
|
